» Valves » System Valves and Valve Accessories » System Components
|
Banjo type fitting with built-in 2/2 valve held open with a pilot air signal. When the signal is removed the valve closes to prevent return flow but will still allow forward flow.
|
 |
|
A continuously held input signal is output as an initial short pulse. The valve is reset only by removal of the input signal.
|
 |
|
Adjustable pneumatic timer (no electronics) suitable for use in hazardous environments, M5 ported sub-base, can be panel mounted. Three timing ranges activated by application of a pneumatic signal, relayed pneumatic output.
|
 |
|
Banjo type fitting with built-in pressure regulator. When fitted to a cylinder that requires a power stroke in one direction only, there is a saving in the amount of air used for the return stroke.
|
 |
|
Banjo type fitting with built-in backpressure sensitive valve. When fitted to the port of a cylinder the valve will give an output signal when it has detected that the back pressure indicates the piston in the cylinder has stopped moving.
|
 |
|
Adjustable pneumatic timer 0,2 - 5 sec standard delay (no electronics) suitable for use in hazardous environments, G1/8 ported, can be panel mounted. Timing range can be extended to 60 seconds by use of external reservoir.
|
 |